Check out our most popular compounded medications! Get Started
Betamethasone Valerate 0.1% Topical Gel is a semisolid formulation designed for easy and precise application on the skin through a convenient pump mechanism. This gel-like consistency ensures targeted treatment and effective absorption of the active ingredient.
It is primarily used to treat inflammatory skin conditions such as eczema, psoriasis, and dermatitis, providing relief from symptoms like redness, itching, and swelling.
Licensed to fill prescriptions for patients in RI, MA, CT, NJ, NH, FL, ME and PA. New York patients are served on a limited basis while nonresident registration is pending.
Betamethasone Valerate 0.1% Topical Gel is a potent corticosteroid formulation designed for topical application to the skin. This medication is used to relieve inflammation and itching caused by various skin conditions such as eczema, psoriasis, and dermatitis. By suppressing the immune response in the skin, it effectively reduces swelling, redness, and discomfort associated with these conditions.
The gel is a semisolid formulation that is dispensed through a convenient pump mechanism. This design facilitates easy and precise application, allowing patients to target affected areas directly. The gel-like consistency ensures that the medication is absorbed quickly without leaving a greasy residue, which enhances patient comfort and compliance.
For patients, using Betamethasone Valerate 0.1% Topical Gel as prescribed can lead to significant improvement in skin condition symptoms. It's important to apply a thin layer to the affected area as directed by a healthcare professional, usually once or twice daily. Patients should avoid using it on broken skin or sensitive areas such as the face, groin, or underarms unless instructed by a physician.
Prescribers may find this formulation beneficial for patients who require a potent corticosteroid with the convenience of controlled dosing. The pump mechanism reduces the risk of over-application and contamination, promoting safer use. Additionally, the gel form is suitable for areas of the body where a non-occlusive, quickly absorbing medication is preferred.
It's advisable for prescribers to set a treatment duration and reassess the patient's condition periodically.
If you have any questions, reach out to us.
Betamethasone Valerate 0.1% Topical Gel is a potent corticosteroid formulation designed for the treatment of inflammatory skin conditions such as eczema, psoriasis, and dermatitis. As a topical gel, it is applied directly to the affected area, allowing for targeted treatment and minimizing systemic exposure. However, despite its localized application, there are potential drug interactions and considerations that both patients and prescribers should be aware of when using this formulation.
Firstly, it is important to consider the potential for systemic absorption, especially when applied over large surface areas, used under occlusive dressings, or when used for prolonged periods. This can lead to interactions with other medications that the patient may be taking. For instance, patients on systemic corticosteroids or other immunosuppressive therapies should be monitored closely, as the combined effects can increase the risk of systemic side effects such as adrenal suppression, Cushing's syndrome, or immunosuppression.
Additionally, patients using other topical medications on the same area should be cautious, as the concurrent use of multiple topical agents can alter the absorption and efficacy of Betamethasone Valerate. For example, the use of other corticosteroids or skin products containing alcohol or astringents may enhance the drying or irritating effects on the skin, potentially exacerbating the condition being treated.
Patients with a history of hypersensitivity to corticosteroids or any component of the gel formulation should avoid using this product, as allergic reactions can occur. Furthermore, interactions with other dermatological treatments, such as phototherapy, should be considered, as corticosteroids can alter the skin's response to UV light, potentially affecting the efficacy of such treatments.
For patients with diabetes, it is crucial to monitor blood glucose levels, as corticosteroids can affect glucose metabolism, potentially leading to hyperglycemia. This is particularly relevant for patients using other medications that influence blood sugar levels, such as insulin or oral hypoglycemic agents.
Lastly, it is essential to educate patients on the proper application technique to minimize the risk of interactions and side effects. Patients should be advised to apply a thin layer of the gel to the affected area and to wash their hands thoroughly after application to prevent inadvertent transfer to other body areas or individuals.
If you have any questions or concerns regarding the use of Betamethasone Valerate 0.1% Topical Gel and potential drug interactions, please reach out to us for further guidance and support.
This semisolid gel is dispensed through a convenient pump mechanism, ensuring easy and precise application. The gel-like consistency allows for smooth spreading over the affected area, promoting targeted treatment and optimal absorption of the active ingredient, betamethasone valerate, into the skin.
Betamethasone valerate works by modulating the body's immune response to reduce inflammation, redness, and itching associated with various dermatological conditions. It achieves this by inhibiting the release of inflammatory mediators and suppressing the migration of leukocytes to the site of inflammation. This action helps to alleviate symptoms and improve the overall appearance of the skin.
The gel formulation is particularly beneficial for patients as it provides a non-greasy, quick-drying application that is less likely to leave residue on clothing or bedding. This makes it an ideal choice for treating conditions such as eczema, psoriasis, and dermatitis, where frequent application may be necessary. The pump mechanism ensures that the correct dose is delivered with each use, minimizing waste and enhancing the precision of treatment.
For prescribers, the use of Betamethasone Valerate 0.1% Topical Gel offers a reliable option for managing inflammatory skin conditions. Its potent anti-inflammatory properties make it suitable for short-term use in acute flare-ups, while the gel formulation provides a cosmetically acceptable option for patients. It is important to monitor patients for potential side effects, such as skin thinning or adrenal suppression, especially with prolonged use or application over large surface areas.
Patients should be advised to apply the gel sparingly to the affected area, following the specific instructions provided by their healthcare provider. It is crucial to avoid contact with the eyes, mouth, and other mucous membranes. If any adverse reactions occur, patients should discontinue use and consult their healthcare provider promptly.
If you have any questions or require further information about Betamethasone Valerate 0.1% Topical Gel, please do not hesitate to reach out to us at Bayview Pharmacy. Our team of compounding pharmacists is here to assist you with any inquiries you may have regarding this formulation or its use in treating specific disease states.
Betamethasone Valerate 0.1% Topical Gel is used to treat various skin conditions such as eczema, psoriasis, and dermatitis. It helps reduce inflammation, redness, and itching.
Apply a thin layer of the gel to the affected area of the skin, usually once or twice daily, as directed by your healthcare provider. Use the pump mechanism to dispense the gel for easy and precise application.
Use on the face only if directed by your healthcare provider, as the skin on the face is more sensitive and may be more prone to side effects.
Possible side effects include burning, itching, irritation, or dryness at the application site. If these effects persist or worsen, contact your healthcare provider.
The pump mechanism allows for easy and precise dispensing of the gel, ensuring that you apply the correct amount to the affected area without waste.
Do not apply the gel to broken or infected skin unless directed by your healthcare provider, as it may worsen the condition.
Use in children should be under the guidance of a healthcare provider, as children may be more sensitive to the effects of topical corticosteroids.
Use the gel for the duration prescribed by your healthcare provider. Prolonged use can lead to skin thinning and other side effects.
Do not cover the treated area with a bandage or dressing unless directed by your healthcare provider, as this can increase absorption and risk of side effects.
If you miss a dose, apply it as soon as you remember. If it is near the time of the next dose, skip the missed dose and resume your usual dosing schedule. Do not double the dose to catch up.
This formulation is compounded by Bayview Pharmacy on a prescriber's order for an individual patient. It is not an FDA-approved drug product, and the FDA has not evaluated it for safety, effectiveness, or manufacturing quality.
A valid prescription is required. Availability depends on Bayview's licensure in your state. This page is general information, not medical advice. Discuss your situation with a licensed healthcare provider.
Search by NCPDP 4106882, or by name and ZIP: Bayview Pharmacy, Warwick, RI 02886. Select it as the destination pharmacy and save it as a favorite. Click any value to copy it.
Compounded preparations have no NDC, so this formula will not appear in your EHR's drug search. Use your system's compound, non-formulary, or free-text prescription entry and name the preparation exactly as written in step 3. If your EHR forces you to pick a listed drug, pick the closest entry for the active ingredient and put the full formula in the prescription body (the Sig or directions field), not in Notes to Pharmacy.
Compounded preparations have no NDC and will not appear in your drug search. For EPCS to validate, select a drug entry your EHR recognizes as controlled, usually the bulk powder entry for the active ingredient (for example Ketamine (bulk) powder, not a branded product), then put the full formula from step 3 in the prescription body. A free-text entry that does not validate as controlled will be rejected by your EPCS module.
Quantity and directions are starting points for this dose form, not treatment recommendations. Dosing remains the prescriber's responsibility.
Transmit from your EHR. For this non-controlled preparation we also accept fax to (401) 284-4506 and phoned orders at (401) 284-4505. Order forms are on the formulation pages and in the prescriber portal.
Transmit with two-factor authentication through your EPCS-enabled EHR. No order form is offered for this preparation; e-prescribing guides for our controlled preparations are on the formulation pages.
Licensed to dispense in RI, MA, CT, NJ, NH, FL, ME, and PA; New York is served on a limited basis while nonresident registration is pending. Compounded preparations are not FDA-approved. A valid prescription is required. Full guide, including steps by EHR: How to e-prescribe to Bayview. Questions about this formula: call (401) 284-4505.
Apply topically to affected area(s)
